| FUNCTION: | To carry one 40’ loaded container of 72.000 lbs. or one 20’ loaded container of 40.000 lbs. |
| GENERAL: | |
| OVERALL LENGTH | 40′ 6” / 12.34 mts (40′ Position) – 30′ / 9.14 mts (20′ Position) |
| OVERALL WIDTH | 96” / 2.44 mts. |
| KINGPIN LOCATION | 18” / 0.46 mts. |
| KINGPIN HEIGHT | 48” / 1.22 mts. |
| REAR HEIGHT | 48” / 1.22 mts. |
| AXLE SPACE | 49 + 49” or 1.30 + 1.30 mts. |
| TARE WEIGHT | 17.800 lbs. +/- 3% |
| SPECIFICATIONS: | |
| STEEL / FASTENERS | High strength GR50 steel / Grade 5. |
| PAINT | 70% Zinc Rich primer and an urethane topcoat. |
| COLOR | Customer’s requirement. |
| MAIN BEAM | 12 ½” high x 4” wide flange fabricated I-beam and ¼ web; top and bottom semi-eliptic gooseneck is 4 ¾”x1/2” and ½” web GN with 5” UPN reinforces. |
| SLIDER FRAME | 13 ¾” high x 6” wide flange fabricated type UPN-beam and 3/8” web; four spring loaded pins lock slider frame to main frame in retracted or extended position. |
| CROSS MEMBERS | Fabricated channel type 3/16x3x8” |
| FRONT BOLSTER | 6x6x1/4” type tube and 5/16” in extremes. |
| CENTRAL BOLSTER | 6x6x1/4” type tube with ½” end plates and two retractable twist locks. |
| REAR BOLSTER | Box type with 5/16 x 8” top plate and 7x7x¼” thick “u” type bottom channel. |
| UPPER COUPLER ASSEMBLY | Pick up plate is 5/16” thick with 2” drain holes, extended 43” and reinforce ½” |
| KINGPIN | 2” following the AAR Certificate. |
| ICC BUMPER | Plate 8×1/2” and square tube step bumper 4x4x3/16” |
| TWIST LOCKS AND SLIDE PINS | Meets ISO standards and requirements. |
| LANDING GEAR | Two speed, 56.000 lbs. capacity with heavy duty 10×10” sand shoes and mounted at main beams with box and skirt extended. |
| SUSPENSION | Heavy duty mechanical suspension for two axles with 11 leaf springs of 3 ½” wide and one hole equalizers (Ampro or Hutchens). |
| AXLES | Two axles 5” type pro-par,13 tons. capacity with cone and bearing HM518445 track of 71.5” |
| WHEELS AND DRUMS | Drum of 16 ½ x7” and 6-spoke wheels of 20”; standard brake lining. |
| RIMS/WHEEL | 12 units Steel 20×7.5” open center. |
| TIRES | 12 units 10.00×20 type tube. |
| AIR & BRAKE SYSTEM | Dual air brake system, 30/30 type on 1st and 2nd axle. |
| ELECTRICAL SYSTEM | 12 volt, 7-way split pin receptacle plug and modular wiring harness. |
| MARKINGS | Characteristics’ plate and customer’s logos. |
| MUD FLAPS | White plastics with fasteners at rear bolster. |
| GUARANTEE | One year. |
